AXE10L/le rev.2 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE10L/le rev.: 2 date: 2014-04-04 oscillator type: smd spxo with lvds output parameter min. typ. max. unit condition frequency range 1.000 800 mhz frequency stability (note 2) 25 50 ppm ppm option 2 = 25-0c option 2 = 50-4f initial tolerance ppm vs. operating temperature range ppm included in frequency stability vs. supply voltage variation 3 ppm v s 5% vs. load change 1 ppm load 5% long term (aging) per year 3 ppm @ +25c frequency adjustment range electronic frequency control (efc) range n.a. ppm rf output signal waveform lvds load 50 ? rise & decay time 1 ns 20% ~ 80% of amplitude symmetry (duty cycle) 45 55 % @ v s /2 start-up time 10 ms jitter (rms) 1 ps 10 khz ~ 20 mhz supply voltage v s 3.15 4.75 3.3 5.0 3.45 5.75 v v option 1 = 33 option 1 = 50 current consumption (steady state) 120 ma @ +25c (note 3) not applicable model = AXE10L enable/disable function (pin 1) v l < 0.8 v: enable v h > 2.0 v or open: disable model = AXE10Le operating temperature range 0 -40 +70 +85 c c option 2 = 25-0c option 2 = 50-4f enclosure (see drawing) (lxwxh) 14.8x9.8x5.5 max. mm iec 61837 co 27 weight 2 g packing tape & reel iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. frequency stability = initial tolerance + stability vs. temperature 3. maximum current consumption depends on frequency an d load 4. all combinations of options might not be available. please consult factory absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -55 +105 c ordering code model option 1 [supply voltage] option 2 [temperature range] revision frequency [mhz] AXE10L AXE10Le 50 25-0c rev.2 155.520 example: AXE10L-50-25-0c_rev.2 C 155.520 mhz
AXE10L/le rev.2 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections AXE10L: pin # symbol function 1 n.c. no connection 2 n.c. no connection 3 gnd ground 4 rf out1 rf output 5 rf out2 complementary rf out 6 vs supply voltage AXE10Le: pin # symbol function 1 e/d enable/disable 2 n.c. no connection 3 gnd ground 4 rf out1 rf output 5 rf out2 complementary rf out 6 vs supply voltage handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
AXE10L/le rev.2 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 2 d1 01.10.2012 editorial changes bn bn 2 d2 04.04.2014 environmental conditions updated, e ditorial changes hh hh
|
